If your water heater has failed in Howard Beach, or water has been in your basement, call us any hour of the day or night. In normal conditions a licensed plumber can reach you in one to three hours, you get a written flat price before any work begins, and nights, weekends, and holidays cost the same as a weekday afternoon.
We're a water heater repair and water heater installation company based in Forest Hills, with a team of eight licensed plumbers covering all of Queens, including Howard Beach (11414). We repair and replace tank and tankless heaters, gas and electric.
We are open 24/7 - 1-3 hour response in normal conditions - Written flat price before work - Tank installations from $1,600 - A.O. Smith, Rheem, Navien, Bosch, and every other major brand.
Flooded water heaters are dangerous to restart, even when they look fine afterward. Gas appliance manufacturers say controls that have been submerged must be replaced, and that homeowners should not relight a flooded unit. In one reported case a homeowner was badly burned relighting the pilot on a flooded gas water heater.
If your heater was in floodwater:
After a major storm, many households need help at once, so waits can be longer than usual. We'll give you a realistic arrival time when you call.
Howard Beach was built on reclaimed marshland between Brooklyn and the Rockaway Peninsula. Hurricane Sandy flooded hundreds of homes here in 2012, and heavy rain has put water in basements since. That matters for water heaters, because in most homes the heater lives in the basement or at floor level, right where water arrives first.
When we replace a heater in a low basement, we talk through where it sits and how it's protected, such as a drain pan and a leak sensor, so a small leak doesn't become a big one.
Howard Beach isn't one kind of housing. The 11414 ZIP code includes several sections, and the setup in your building can differ:
Old Howard Beach and Rockwood Park (New Howard Beach). Mostly single-family homes, separated by Cross Bay Boulevard. A basement heater serving one household is the common setup.
Lindenwood. Co-ops, condos, and multifamily buildings are common. If you live in a co-op or condo, check with your board or managing agent first, because the heater may be part of a building system, not yours. If the heater serves only your unit, we handle it.
Hamilton Beach and the waterfront edges. Homes closest to the water see the most flood risk, so heater placement and protection matter most there.
Most heaters that haven't been flooded don't need replacing. They need someone to find what is actually failing. We handle gas water heater repair and electric water heater repair, plus regular water heater maintenance such as sediment flushing. Common calls are no hot water, a leaking base, rumbling or popping from sediment, rusty hot water, and a pilot that won't stay lit. If water is on the floor right now, shut off the cold-water supply to the heater and the gas valve or breaker, then see our emergency water heater repair.
Replace if the heater was in floodwater, if the tank itself is leaking, or if it's past about 10 years old with repeated problems.
Repair if the tank is sound and the unit is under about 8 years old. Most tank heaters last roughly 8 to 12 years.
Find the age: Look at the data plate on the side of the tank. The serial number encodes the manufacture date, and the format differs by brand. Read it to us and we'll tell you.
We'll tell you honestly which side you're on. If a repair is the right call, that's what we quote.
We handle water heater replacement from removal of the old unit to a tested new one. See also tank water heater replacement and tank water heater installation.
What it costs. A tank water heater installation in Howard Beach typically runs $1,600 to $3,000. Three things move the price: the brand, the tank size, and the warranty length. A longer warranty costs more up front. You get the exact figure in writing before we start. Where the city requires a permit, we file it.
Gas and hot water equipment needs a licensed plumber. Our team is eight licensed plumbers, and where the city requires a permit for the job, we file it. We'll tell you before work starts what the job involves.
We cover Howard Beach from Lindenwood in the north to Old Howard Beach, Rockwood Park, and Hamilton Beach, including the streets along Cross Bay Boulevard. We work on every major brand, including A.O. Smith, Rheem, Navien, and Bosch.
Typically one to three hours from your call in normal conditions, any day or night, with no extra charge for nights, weekends, or holidays. After a major storm demand is higher, and we'll give you a realistic arrival time when you call
Usually not. Submerged gas controls must be replaced, and the burner, venting, insulation, and tank can all be damaged. In most cases a flooded heater is replaced, and we'll inspect it and give you a written flat price.
No. Don't relight the pilot or restart the unit until a licensed plumber has inspected it. If you smell gas, leave the building and call 911 and your gas utility from outside.
Tank water heater installation typically runs $1,600 to $3,000, depending on brand, tank size, and warranty. Tankless pricing depends on the unit and the gas and venting work, so we quote it in writing after seeing the space. Either way, you get a flat price before work starts.
If the heater serves only your unit, yes. Check with your board or managing agent first, because in some buildings the heater is part of a building system.
Often, yes, but it depends on your gas supply, venting, and available space. We check those before recommending it.
Where the city requires a permit, we file it.
If your water heater is out, leaking, or was in floodwater, we can have a licensed plumber at your Howard Beach home today, with a written price before we start. Questions first? Contact us or learn about our team.